3D 打印开发创新教具在高职专业教学中的应用研究

基金项目:

浙江省高校访问工程师“校企合作项目”(FG2018143)

Research on the Application of 3D Printing Development Innovative Teaching Aids in Higher Vocational Education

摘要: 结合《机械制图》《机械原理》和《机械创新设计》等机械类专业课程的实物教具需求,利用DL P型3D打印技术进行创新型教具的设计与开发,并投入高职专业教学应用中。创新性地将DLP型3D打印技术与机械类专业课程教学结合、将先进制造技术与职业教育教学模式结合,实现多样化实物教学,顺应创新型教育发展的趋势,并拓展先进制造技术的应用方向。
- 创新教具 /
- 3D打印 /
- 先进制造
Abstract: According to the demand of innovative teaching aids for mechanical courses, such as《Mechanical Drawing》, 《Mechanical Principle》 and 《Mechanical Innovation Design》,DLP 3D printing technology is used to design and develop innovative teaching aids and put them into practical teaching. Innovative combination of DLP 3D printing technology and mechanical professional courses teaching, advanced manufacturing technology and vocational education teaching mode, to achieve diversified physical teaching, to conform the development trend of innovative education and expand the application of advanced manufacturing technology.
- Innovative teaching aids /
- 3D printing technology /
- Advanced manufacturing

[1]	周永清.机械原理创新教具学具进课堂[J].实验技术与管理,2016(2):11-13+37.
[2]	郑海烈,周寿明,谢玉霞,等.基于 3D 打印教具设计与制造[J].机械研究与应用,2019(1):126-127.
[3]	刘济昌.教具的历史与启示[J].教学仪器与实验,2011,27(1):5-8.
[4]	卢秉恒,李涤尘.增材制造(3D 打印)技术发展[J].机械制造与自动化,2013(4):1-4.
[5]	张学军,唐思熠,肇恒跃.3D 打印技术研究现状和关键技术[J].材料工程,2016(2):122-128.
[6]	王广春.快速成型与快速模具制造技术及其应用[M].北京:机械工业出版社,2013.
[7]	吴怀宇.3D 打印:三维智能数字化制造[M].北京:电子工业出版社,2015.
[8]	杨继全,戴宁,侯丽雅.三维打印设计与制造[M].北京:科学出版社,2013.
[9]	徐巍,凌芳.熔融沉积快速成型工艺的精度分析及对策[J].实验室研究与探索,2009,28(6):27-29.
[10]	张学军,唐思熠,肇恒跃.3D 打印技术研究现状和关键技术[J].材料工程,2016(2):122-128．

点击查看大图